Dual-Source CT Lowers Dose on Heart Scan
July 17, 2008 – A new study reveals that, with dual-source computed tomography (DSCT), the dosage for a heart examination can be significantly lowered, in comparison to conventional computed tomography.
The study also demonstrated that stenoses can be diagnosed with similar high accuracy as with invasive X-ray angiography. At the University Hospital Zürich in Switzerland, 120 patients with suspected coronary heart disease were scanned with the world’s first CT scanner with two X-ray tubes, a SOMATOM Definition from Siemens Healthcare. The Siemens application, Adaptive Cardio Sequence with the step-and-shoot mode, was also used for the first time with a dual-source CT. The results of the study were published in the June issue of Heart, the official journal of the British Cardiovascular Society.
Researchers at the university hospital set out to see whether the dose used during CT angiography can be reduced. The research team used Adaptive Cardio Sequence, which was recently developed by Siemens for all SOMATOM Definition Scanners. The application is based on the step-and-shoot method, in which the next respective diastole is calculated and only this phase of the cardiac cycle is used to obtain image data. The combination of Adaptive Cardio Sequence and the DSCT’s maximum time resolution of 83 msec reportedly facilitates this technique and permits significant reduction in dosage.
“The results show that CT coronary angiography with a dual-source CT in step-and-shoot mode produces images of excellent diagnostic quality in patients with stable heart rates up to 70 bpm. The dosage reduction achieved in comparison to previous CT angiography is also remarkable. In our study, we required an effective dose of 2.5 mSv on average with a deviation of plus/minus 0.8 mSv. In the literature, a normal average effective dose for heart scans of between 9 mSv and 21 mSv is reported,” said Hatem Alkadhi, M.D., specialist in radiology at the Institute for Diagnostic Radiology, University Hospital Zürich.
The Adaptive Cardio Sequence supplements the step-and-shoot method with algorithms that monitor the heart frequency of patients and, if necessary, respond to arrhythmia, such as extrasystoles, additional heart beats. In this case, the recording phase is automatically postponed in order to avoid image errors due to the sudden movement. In addition, the recording window can be widened a little more if required so that, with the Adaptive Cardio Sequence, the robustness of the CT scan can be increased significantly overall.
H. Scheffel, MD, H. Alkadhi, MD, S. Leschka, MD, A. Plass, L. Desbiolles, I. Gruber..et al: Low-Dose CT Coronary Angiography in the Step-and-Shoot Mode: Diagnostic Performance, in Heart online, June 2, 2008.
For more information: http://www.siemens.com/healthcare
More like this
- Study Shows Dual-Source CT Dosage for Heart Exam Can Be Lowered Compared to Conventional CT
- Step-and-Shoot Returns as a Low Dose Solution
- Technique as Well as Technology Can Help Lower CTA Dose
- Cardio Prospective CT Software Reduces Radiation By 80 Percent
- SURE Cardio Prospective Helps Reduce Radiation Dose