Researchers Explore Novel Method for Simultaneously Measuring Blood Pressure, Arterial Stiffness

 

February 10, 2012

February 10, 2012 — Researchers from the National Institute of Advanced Industrial Science and Technology (AIST), Japan, determined arterial stiffness using the relationship between cuff pressure and arterial volume. This was calculated using pulse pressure (systolic - diastolic) and the amplitude of cuff oscillations. Readings were combined to produce an arterial stiffness index (API). To test the validity of this new method, API results from over 100 volunteers were compared to arterial stiffness determined by pulse wave velocity (tonomography) and carotid arterial compliance (ultrasound).

Arterial stiffness is a major contributor to cardiovascular disease but is very difficult to measure. It can also influence blood pressure readings since these rely on the time taken for arteries to return to normal volume and flow after compression. A new method for measuring arterial stiffness has been reported in BioMed Central’s open access journal “BioMedical Engineering OnLine.” This simple, noninvasive, calculation is able to interpret standard oscillometric measurements to quantify both arterial stiffness and blood pressure simultaneously.

Not only does arterial stiffness increase hypertension — hypertension can exacerbate arterial stiffness in a self-perpetuating spiral. Arterial stiffness is also associated with type II diabetes and is involved in the development of circulatory problems. However, arterial stiffness can be addressed by diet and exercise so early detection is essential. Typically arterial pressure is measured using tonomography or ultrasound but both of these are difficult to perform and consequently are often inaccurate.

For more information: www.biomedcentral.com