Feature | April 30, 2015

New Study Shows How Babies’ Lives Were Saved by 3-D Printing

Researchers report promising results from first-ever cases of severe tracheobronchomalacia treated by custom-designed airway splints at U-M

Kaiba Gionfriddo

Kaiba was just a newborn when he turned blue because his little lungs weren’t getting the oxygen they needed. Garrett spent the first year of his life in hospital beds tethered to a ventilator, being fed through his veins because his body was too sick to absorb food. Baby Ian’s heart stopped before he was even six months old.

Three babies all had the same life-threatening condition: a terminal form of tracheobronchomalacia, which causes the windpipe to periodically collapse and prevents normal breathing. There was no cure and life expectancies were grim.

The three boys became the first in the world to benefit from groundbreaking 3-D printed devices that helped keep their airways open, restored their breathing and saved their lives at the University of Michigan’s C.S. Mott Children’s Hospital. Researchers have closely followed their cases to see how well the bioresorable splints implanted in all three patients have worked, publishing the promising results in Science Translational Medicine.

“These cases broke new ground for us because we were able to use 3-D printing to design a device that successfully restored patients’ breathing through a procedure that had never been done before,” said senior author Glenn Green, M.D., associate professor of pediatric otolaryngology at C.S. Mott Children’s Hospital.

“Before this procedure, babies with severe tracheobronchomalacia had little chance of surviving. Today, our first patient Kaiba is an active, healthy 3-year-old in preschool with a bright future. The device worked better than we could have ever imagined. We have been able to successfully replicate this procedure and have been watching patients closely to see whether the device is doing what it was intended to do. We found that this treatment continues to prove to be a promising option for children facing this life-threatening condition that has no cure.”

The findings reported today suggest that early treatment of tracheobronchomalacia may prevent complications of conventional treatment such as a tracheostomy, prolonged hospitalization, mechanical ventilation, cardiac and respiratory arrest, food malabsorption and discomfort. None of the devices, which were implanted in then 3-month-old Kaiba, 5-month-old Ian and 16-month-old Garrett have caused any complications.

The findings also show that the patients were able to come off of ventilators and no longer needed paralytics, narcotics and sedation. Researchers noted improvements in multiple organ systems. Patients were relieved of immunodeficiency-causing proteins that prevented them from absorbing food so that they no longer needed intravenous therapy.

Kaiba Gionfriddo made national headlines after he became the first patient to benefit from the procedure in 2012, and the procedure was repeated with Garrett Peterson and Ian Orbich. Using 3-D printing, Green and his colleague Scott Hollister, Ph.D., professor of biomedical engineering and mechanical engineering and associate professor of surgery at U-M, were able to create and implant customized tracheal splints for each patient. The device was created directly from CT scans of their tracheas, integrating an image-based computer model with laser-based 3-D printing to produce the splint.

The specially- designed splints were placed in the three patients at C.S. Mott Children’s Hospital. The splint was sewn around their airways to expand the trachea and bronchus and give it a skeleton to aid proper growth. The splint is designed to be reabsorbed by the body over time. The growth of the airways were followed with CT and MRI scans, and the device was shown to open up to allow airway growth for all three patients.

Doctors received emergency clearance from the FDA to do the procedures.

“We were pleased to find that all of our cases so far have proven to improve these patients’ lives,” Green said. “The potential of 3-D-printed medical devices to improve outcomes for patients is clear, but we need more data to implement this procedure in medical practice.”

Authors say the recent report was not designed for device safety and that rare potential complications of the therapy may not yet be evident. However, Richard G. Ohye, M.D., head of pediatric cardiovascular surgery at C.S. Mott who performed the surgeries, says the cases provide the groundwork to potentially explore a clinical trial that could help other children with less-severe forms of tracheobronchomalacia in the future.

Kaiba, now a curious, active 3-year-old who loves playing with his siblings and who recently saw his favorite character Mickey Mouse at Disney World thanks to the Make-a-Wish Foundation, was back at Mott in April for a follow-up appointment.

The splint is dissolving just how it’s supposed to and doctors expect that eventually, his trachea will reflect that of his peers with no signs of the tracheobronchomalacia that nearly killed him as a newborn.

“The first time he was hospitalized, doctors told us he may not make it out,” Kaiba’s mom April Gionfriddo remembered. “It was scary knowing he was the first child to ever have this procedure, but it was our only choice and it saved his life.”

Now an energetic 2-and-a-half-year-old with a contagious laugh, Garrett is able to breathe on his own and spend his days ventilator-free. Ian, now 17 months old, is known for his huge grins, enthusiastic high fives and love for playing with his big brother, Owen. Ian had the splint procedure done at Mott exactly one year ago this month.

“We were honestly terrified, just hoping that we were making the right decision,” his mother Meghan Orbich remembered. “I am thankful every single day that this splint was developed. It has meant our son’s life. I am certain that if we hadn't had the opportunity to bring Ian to Mott, he would not be here with us today.”

For more information: http://stm.sciencemag.org/

Related Content

CDN to Integrate Advanced Cardiac Imaging Tools From DiA Imaging Analysis
Technology | August 10, 2017
August 10, 2017 — CDN recently announced a new partnership agreement with DiA Imaging Analysis Ltd., makers of next-g
3D printing of the heart and coronary artery tree from a patient's CT scan.
Sponsored Content | Webinar | 3-D Printing| August 09, 2017
Learn how 3-D printing empowers medical device manufacturer Medtronic to bring products to market faster, develop bet
FFR-CT, heartflow

An example of an FFR-CT image, showing the FFR values for all coronary vessel segments and the reduction in hemodynamic flow after specific lesions.

News | CT Angiography (CTA)| July 12, 2017
July 12, 2017 — The American Medical Association (AMA) has granted a Category III Tracking Code for estimated coronar
Ziosoft's PhyZiodynamics 4-D processing showing a replaced aortic valve

An example of Ziosoft's PhyZiodynamics 4-D processing showing a replaced aortic valve.

Technology | Computed Tomography (CT)| July 12, 2017
July 12, 2017 — At the 2017 annual meeting for the Society of Cardiovascular Computed Tomography (SCCT), Ziosoft show
GE Additive and Stryker Announce Additive Manufacturing Partnership
News | 3-D Printing| July 06, 2017
GE Additive and Stryker have entered a partnership agreement to support Stryker’s growth in additive manufacturing. The...
3d printing can aid procedural navigation in transcatheter tricuspid procedures
News | 3-D Printing| June 15, 2017
June 15, 2017 – Structural heart interventions are increasingly applied in patients with severe tricuspid regurgitati
Innovative Cardiovascular Ultrasound Solutions Showcased at ASE 28th Annual Scientific Sessions
News | Cardiovascular Ultrasound| June 01, 2017
June 1, 2017 — More than 50 companies and organizations will display their latest products and services at the Americ
Strain Imaging Improves Cardiac Surveillance of Certain Breast Cancer Patients
News | Cardio-oncology| May 03, 2017
Epsilon Imaging Inc. announced a research study using EchoInsight was presented at the American College of Cardiology (...
3-D-printed Model of Stenotic Intracranial Artery Enables Vessel-Wall MRI Standardization
News | 3-D Printing| April 18, 2017
A collaboration between stroke neurologists at the Medical University of South Carolina (MUSC) and bioengineers at the...
3-D Printed Patch Can Help Mend a ‘Broken’ Heart

This photo shows the 3D-bioprinted cell patch in comparison to a mouse heart. When the patch was placed on a live mouse following a simulated heart attack, the researchers saw significant increase in functional capacity after just four weeks. Image courtesy of Patrick O’Leary, University of Minnesota.

News | Stem Cell Therapies| April 18, 2017
April 18, 2017 — A team of biomedical engineering researchers, led by the University of Minnesota, has created a revo
Overlay Init