News | Heart Valve Technology | March 07, 2018

FDA Expands Approval of Replacement Heart Valve

This replacement heart valve is the smallest mechanical valve size approved in the world

The U.S. Food and Drug Administration expanded the approval of a heart valve to include a size small enough to be used in newborn pediatric patients to treat heart defects.

The U.S. Food and Drug Administration expanded the approval of a heart valve to include a size small enough to be used in newborn pediatric patients to treat heart defects. Specifically, the agency approved the Masters Series Mechanical Heart Valve with Hemodynamic Plus (HP) Sewing Cuff to include the 15-mm valve size, making it the smallest mechanical heart valve approved in the world.

“While larger replacement heart valves have been approved for years, there is an unmet need in young pediatric patients, especially newborns and infants, with congenital valve defects who may be too small to use currently-marketed heart valves,” said Jeff Shuren, M.D., J.D., director of the FDA’s Center for Devices and Radiological Health.

Heart valve disease occurs if one or more of the four heart valves, which direct the flow of blood through the heart, fail to function properly. In pediatric patients, a malfunctioning heart valve is often the result of a congenital heart defect at birth. Each year, more than 35,000 babies in the U.S. are born with congenital heart defects, some of which will require heart valve surgery and, potentially, replacement heart valve surgery. However, prior to today’s approval, there have been limited replacement heart valve options available because of the patients’ small size. The Masters Series 15-mm HP valve represents an important treatment option for these patients.

The Master Series Mechanical Heart Valve is a rotatable, bileaflet (two-leaflet) valve designed for implantation in the aortic or mitral position. The bileaflet design consists of two semi-circular discs that open and close in response to blood pressure changes during the heartbeat, similar to a patient’s own valve.

The Masters Series Mechanical Heart Valve was first approved in 1995 for patients with a diseased, damaged or malfunctioning aortic or mitral heart valve. The device is also approved for use in replacing previously implanted aortic or mitral prosthetic heart valves. Today’s approval expands the range of valve sizes available, providing smaller patients another treatment option.

The FDA evaluated clinical data from a single-arm study of 20 pediatric patients with serious heart failure ranging in age from 1.5 weeks to 27 months at the time of mitral valve implant. The data showed that one year after the implant procedure, the probability of survival was 69.3 percent and the probability of not experiencing a valve-related adverse event was 66.8 percent. Serious valve-related adverse events observed during the study through one-year follow-up included blood clots in the device and bleeding in the brain. Anticoagulation (blood thinning) therapy may be necessary after the procedure, to prevent clotting on the device, which can increase the risk of bleeding.

The Master Series Mechanical Heart Valve should not be used by patients unable to tolerate anticoagulation therapy.

The FDA granted approval of the Master Series Heart Valve to St. Jude Medical. 

For more information: www.fda.gov

Related Content

Medtronic Announces TAVR Study of Aortic Stenosis Patients With Bicuspid Valves
News | Heart Valve Technology | September 19, 2018
The U.S. Food and Drug Administration (FDA) has approved an investigational device exemption (IDE) to initiate a new...
4C Medical's AltaValve First-in-Human Experience to be Presented at TCT 2018
News | Heart Valve Technology | September 17, 2018
September 17, 2018 — 4C Medical Technologies Inc.
Gore Acquires Pipeline Medical Technologies Inc.
News | Heart Valve Technology | September 06, 2018
W. L. Gore & Associates Inc. (Gore) announced the acquisition of Pipeline Medical Technologies Inc., a privately...
The Edwards Lifesciences Cardioband Tricuspid Valve Reconstruction System received the European CE mark approval in May.

The Edwards Cardioband Tricuspid Valve Reconstruction System received the European CE mark approval in May, becoming the first transcatheter tricuspid repair device to be approved in the world.

Feature | Heart Valve Technology | August 21, 2018 | Jeff Zagoudis
The tricuspid valve has been dubbed “the forgotten valve” by many practitioners in the interventional cardiology spac
Earlier Intervention for Mitral Valve Disease May Lead to Improved Outcomes
News | Heart Valve Technology | July 26, 2018
The number of patients undergoing mitral valve operations are at an all-time high, and new research suggests many...
The Abbott Tendyne transcatheter mitral valve replacement (TMVR) system  is being tested in the SUMMIT Trial.

The Abbott Tendyne transcatheter mitral valve replacement (TMVR) system.

Feature | Heart Valve Technology | July 26, 2018
July 26, 2018 — The pivotal clinical study in the U.S.
A CoreValve TAVR valve seen in a CT scan looking down from the aortic arch into the left ventricle using reconstruction software from TeraRecon.

A CoreValve TAVR valve seen in a CT scan looking down from the aortic arch into the left ventricle using reconstruction software from TeraRecon.

Feature | Heart Valve Technology | July 26, 2018
July 26, 2018 — A new multi-societal expert consensus document has been released that summarizes the position of thes
Abbott Receives FDA Approval for Third-Generation MitraClip Device
Technology | Heart Valve Technology | July 18, 2018
July 18, 2018 — Abbott announced it received approval from the U.S.
Videos | Heart Valve Technology | July 18, 2018
Jonathon Leipsic, M.D., FSCCT, professor of radiology and cardiology at the University of British Columbia, Vancouver
Videos | Heart Valve Technology | July 10, 2018
Ori Ben-Yehuda, M.D., executive director of the Cardiovascular Research Foundation Clinical Trial Center, discusses t
Overlay Init