Webinar | November 17, 2017

WEBINAR: Innovation and Success in 3D-inspired Development of the Business and Clinical Practice

This webinar is supported by an educational grant from Philips Healthcare

The CME webinar “Innovation and Success in 3D-inspired Development of the Business and Clinical Practice,” will take place Thursday, Dec. 7, 2017, at 2 p.m. Eastern Time. Participants will earn complimentary CME credit


Register for this webinar


This webinar is supported by an educational grant from Philips Healthcare


 


Statement of Purpose


Development of the 3D Innovation Lab at Phoenix Children’s Hospital, led by Administrators and Physicians was developed with quality and broad application to clinical service in mind. The lab is staffed by 2 full time senior level technologists who bring their intimate understanding of cross sectional anatomy and technical knowledge of computed tomography and magnetic resonance imaging.


Since its inception the scope of work produced in the 3D Innovation Lab has grown dramatically from simple bone and vascular surface renderings to production of complex anatomical segmentation, surgical and interventional procedure planning, research and development of software upgrades, and assessment of organ and tissue physiology and function. Nearly all clinical disciplines – Cardiology, Neurology, Oncology, and Surgical Specialists – rely upon the virtual and print 3D modeling which originates in the 3D Innovation Lab.


This webinar is designed to teach participants how to plan and implement their own successful 3D Lab business, including business plan development, personnel choices, image acquisition, post-processing protocols, and clinical examples to illustrate the breadth of pathology and how 3D modeling impacts patient care.


 


Learning Objectives


Upon completion of this activity participants will be able to:


• Describe key components for developing a business plan for a 3D Lab

• Review valuable components for successful personnel development

• Explain how to optimize CT and MRI image acquisition and develop post-processing protocols

• Discuss the approach involved with engaging buy- in from key clinical services


Intended Audience:


This activity is intended for radiologists, radiology techs, cardiologists, neurologists, oncologists and surgeons.


 


Presenters:


Dianna M.E. Bardo M.D.

Director of Body MR and Co-Director of the 3D Innovation Lab

Phoenix Children's Hospital


 


Richard Southard, M.D.

Director of CT, Cardiac CT, and Co-Director of the 3D Innovation Lab

Phoenix Children’s Hospital


 


Robyn Augustyn, RT (CT)

3-D Innovation Lab Technologist

Phoenix Children’s Hospital


 


William Barta, MBA

Director of Radiology Administration

Phoenix Children’s Hospital


 


Disclosure Information:


ACHL requires that the faculty participating in a CME/CE activity disclose all affiliations or other financial relationships (1) with the manufacturers of any commercial product(s) and/or provider(s) of commercial services discussed in an educational presentation and (2) with any commercial supporters of the activity. All conflicts of interest have been resolved prior to this CME/CE activity.


Dianna M.E. Bardo, M.D.

Financial Relationship: Koninklijke Philips NV: Master enterprise agreement; consultant; speakers bureau; honorarium

Discussion of off-label or experimental drug/device use: IV gadolinium for cardiac MR and MRA


Richard Southard, M.D.

Financial Relationship: Koninklijke Philips NV: Master enterprise agreement;research support; consultant; speakers bureau; honorarium

Discussion of off-label or experimental drug/device use: None


Robyn Augustyn, RT (CT)

Financial Relationship: None

Discussion of off-label or experimental drug/device use: None


William Barta, MBA

Financial Relationship: None

Discussion of off-label or experimental drug/device use: None


 


Accreditation Statement


This activity has been planned and implemented in accordance with the accreditation requirements and policies of the Accreditation Council for Continuing Medical Education (ACCME) through the joint providership of the Academy for Continued Healthcare Learning (ACHL) and Scranton Gillette Communications. ACHL is accredited by the ACCME to provide continuing medical education for physicians.


 


Credit Designation


The Academy for Continued Healthcare Learning designates this live activity for a maximum of 1.0 AMA PRA Category 1 Credit ™. Physicians should claim only the credit commensurate with the extent of their participation in the activity.


The Academy for Continued Healthcare Learning and Scranton Gillette Communications staff members and others involved with the planning, development, and review of the content for this activity have no relevant affiliations or financial relationships to disclose.


Questions about CME for this webinar? Please contact ACHL at [email protected], or (773) 714-0705, Ext. 205.


 


Register for this webinar


Related Content

FDA Announces Final Guidance and Webinar for Technical Considerations for 3-D-Printed Medical Devices
News | 3-D Printing | January 03, 2018
The U.S. Food and Drug Administration (FDA) issued the final version of the guidance, “Technical Considerations for...
Philips Announces New 3-D Printing Integration With 3D Systems and Stratasys
News | 3-D Printing | December 21, 2017
Philips recently announced agreements with 3D Systems and Stratasys, two global leaders in the 3-D printing industry,...
Videos | 3-D Printing | November 17, 2017
Dee Dee Wang, M.D., Director, Structural Heart Imaging at Henry Ford Hospital, Detroit, explains how her center uses
German Hospital Plans Life-Saving Vascular Surgeries With 3-D Printing

Transparent Stratasys 3-D-printed model of a patient-specific aortic arch, used by the University Hospital Mainz to practice complex endovascular surgeries. Photo courtesy of Business Wire.

News | 3-D Printing | November 16, 2017
Stratasys Ltd. announced that surgeons at the University of Mainz Cardiothoracic and Vascular Surgery Department in...
Materialise Announces Start of Pre-Market Phase for Mitral Valve Planning
News | 3-D Printing | October 30, 2017
Entering their pre-market phase of development, Materialise is working with select U.S. and EU hospital partners to...
Dee Dee Wang runs Henry Ford Hospital's 3D printing lab for its complex structural heart cardiology program.

Dee Dee Wang, M.D., runs Henry Ford Hospital's 3-D printing lab that supports its complex structural heart program.

Feature | 3-D Printing | October 13, 2017 | Dave Fornell
Three-dimensional (3-D) printed anatomic models created from a patient’s computed tomography (CT), magnetic resonance...
3D printing of the heart and coronary artery tree from a patient's CT scan.
Webinar | 3-D Printing | August 09, 2017
Learn how 3-D printing empowers medical device manufacturer Medtronic to bring products to market faster, develop bet
GE Additive and Stryker Announce Additive Manufacturing Partnership
News | 3-D Printing | July 06, 2017
GE Additive and Stryker have entered a partnership agreement to support Stryker’s growth in additive manufacturing. The...
3d printing can aid procedural navigation in transcatheter tricuspid procedures
News | 3-D Printing | June 15, 2017
June 15, 2017 – Structural heart interventions are increasingly applied in patients with severe tricuspid regurgitati
Overlay Init