Feature | February 28, 2014

3-D Printer Creates Device for Heart Treatment

Advanced Visualization Cardiac Diagnostics Implantable Monitors EP Lab

Igor Efimov, Ph.D., the Lucy & Stanley Lopata Distinguished Professor of Biomedical Engineering, works with Sarah Gutbrod, Ph.D. candidate in biomedical engineering in the School of Engineering & Applied Science, in Efimov's lab. Efimov and a team of researchers are developing a custom-fitted, implantable device that can deliver treatment or predict an impending heart attack before a patient shows any physical symptoms. Photo by James Byard, Washington University in St. Louis.

February 28, 2014 — There is now a 3-D elastic membrane made of a soft, flexible, silicon material that is precisely shaped to match the heart's epicardium. Current technology is two-dimensional and cannot cover the full surface of the epicardium or maintain reliable contact for continual use without sutures or adhesives. The 3-D device was created by an international team of biomedical engineers and materials scientists and Igor Efimov, Ph.D., at the School of Engineering and Applied Science at Washington University in St. Louis.

The team can print tiny sensors onto the membrane that can precisely measure temperature, mechanical strain and pH, among other markers, or deliver a pulse of electricity in cases of arrhythmia. Those sensors could assist physicians with determining the health of the heart, deliver treatment or predict an impending heart attack before a patient exhibits any physical signs.

The findings were published online in Nature Communications Feb. 25, 2014.

"Each heart is a different shape, and current devices are one-size-fits-all and don't at all conform to the geometry of a patient's heart," said Efimov, the Lucy and Stanley Lopata distinguished professor of biomedical engineering. "With this application, we image the patient's heart through MRI or CT scan, then computationally extract the image to build a 3-D model that we can print on a 3-D printer. We then mold the shape of the membrane that will constitute the base of the device deployed on the surface of the heart."

Ultimately, the membrane could be used to treat diseases of the ventricles in the lower chambers of the heart or could be inserted inside the heart to treat a variety of disorders, including atrial fibrillation, which affects 3-5 million patients in the United States.

"Currently, medical devices to treat heart rhythm diseases are essentially based on two electrodes inserted through the veins and deployed inside the chambers," Efimov said. "Contact with the tissue is only at one or two points, and it is at a very low resolution. What we want to create is an approach that will allow you to have numerous points of contact and to correct the problem with high-definition diagnostics and high-definition therapy."

Co-leading the team with Efimov is John Rogers, Ph.D., the Swanlund chair and professor of materials science and engineering and director of the F. Seitz Materials Research Laboratory at the University of Illinois at Urbana-Champaign. Rogers, who developed the transfer printing technique, developed the sensors using semiconductor materials including silicon, gallium arsenide and gallium nitride, along with metals, metal oxides and polymers.

Recently, Google announced its scientists had developed a type of contact lens embedded with sensors that could monitor glucose levels in patients with diabetes. Efimov says the membrane his team has developed is a similar idea, though much more sophisticated.

"Because this is implantable, it will allow physicians to monitor vital functions in different organs and intervene when necessary to provide therapy," he says. "In the case of heart rhythm disorders, it could be used to stimulate cardiac muscle or the brain, or in renal disorders, it would monitor ionic concentrations of calcium, potassium and sodium."

Efimov said the membrane could even hold a sensor to measure troponin, a protein expressed in heart cells and a hallmark of a heart attack. Analysis for troponin is standard of care for patients with suspected heart attacks due to a test developed by Jack Ladenson, Ph.D., the Oree M. Carroll and Lillian B. Ladenson professor of clinical chemistry in pathology and immunology and professor of clinical chemistry in medicine at the School of Medicine.

Ultimately, such devices will be combined with ventricular assist devices, Efimov said.

For more information: www.nature.com

Related Content

HeartSciences Announces CE Mark and European Launch of MyoVista High Sensitivity ECG

Just as a Doppler radar color image shows the energy of a storm, MyoVista provides physicians a detailed visual image of the energy distribution during the cardiac cycle.

News | ECG| August 22, 2017
HeartSciences announced the European launch of the MyoVista high sensitivity electrocardiograph (hsECG) Testing Device...
Biotronik Announces U.S. Launch of Edora HF-T QP CRT Pacemaker
Technology | Cardiac Resynchronization Therapy Devices (CRT)| August 21, 2017
Biotronik announced U.S. Food and Drug Administration (FDA) approval and commercial availability of Edora HF-T QP, an...
ASNC and SNMMI Release Joint Document on Diagnosis, Treatment of Cardiac Sarcoidosis
News | Cardiac Imaging| August 18, 2017
August 18, 2017 — The American Society of...
The FDA is concerned about cybersecurity of ICDs and cyber security of other medical devices.
Feature | Cybersecurity| August 16, 2017 | Dave Fornell
There is growing concern among patients and regulators that medical devices, especially implantable electrophysiology
CDN to Integrate Advanced Cardiac Imaging Tools From DiA Imaging Analysis
Technology | August 10, 2017
August 10, 2017 — CDN recently announced a new partnership agreement with DiA Imaging Analysis Ltd., makers of next-g
3D printing of the heart and coronary artery tree from a patient's CT scan.
Sponsored Content | Webinar | 3-D Printing| August 09, 2017
Learn how 3-D printing empowers medical device manufacturer Medtronic to bring products to market faster, develop bet
AUM Cardiovascular Receives FDA Approval for CADence ECG Device
Technology | ECG| August 08, 2017
AUM Cardiovascular announced it has received clearance from the U.S. Food and Drug Administration (FDA) for CADence, a...
Three New Atrial Fibrillation Studies to Feature HeartLight Endoscopic Ablation System
News | Ablation Systems| August 07, 2017
CardioFocus Inc. announced that its HeartLight Endoscopic Ablation System is being featured in three new major clinical...
New Jersey Researcher Exploring New Stem Cell Therapies for Heart Attacks
News | Stem Cell Therapies| August 04, 2017
In petri dishes in her campus laboratory at New Jersey Institute of Technology, Alice Lee is developing colonies of...
New Study Focuses on Protein Responsible For Increased Heart Disease Risk
News | Cardiac Diagnostics| August 03, 2017
August 3, 2017 — A study to reduce the strongest inherited...
Overlay Init